REAMER WOOD TEK SCREWS: Wood to Metal Fastening (Reamer Wings) Torx/Star Drive

Description

Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws
Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum
Reamer Tek Screws Are Coated with a Triple Ceramic Coating, ACQ Pressure Treated Lumber Compatible
Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures
Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal
High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding Power
Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely
Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage
Deep Torx/Star Drive Head on These Tek Screws Reduce “Cam-out” When Installing Screws
Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers
Installation Precautions
:
Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam*
Screw Specs:
#10 x 1-5/8″ Tek Screw Capacity — 7/8″ wood to 1/8″ metal —– -(1-1/16″ Total Thread Length) – T25
#12 x 2″ ……Tek Screw Capacity — 15/16″ wood to 3/16″ metal – (1-1/8″ Total Thread Length) –
T30
#12 x 2-1/2″ Tek Screw Capacity — 1-5/16″ wood to 3/16″ metal -(1-9/16″ Total Thread Length)-
T30
#14 x 2-3/4″ Tek Screw Capacity — 1-9/16″ wood to 1/4″ metal – (1-7/8″ Total Thread Length) –
T30
#14 x 3-1/4″ Tek Screw Capacity — 2-1/16″ wood to 1/4″ metal – (2-3/8″ Total Thread Length) –
T30
#14 x 4″ ……Tek Screw Capacity — 3″ wood to 1/4″ metal ——–(3-1/4″ Total Thread Length) –
T30
Type F Floorboard Screw Comparison:
Compared to a Type “F” Floorboard Screw No Pre-Drilling is Required in Most Applications*
Also Type “F” Floorboard Screws Are Not Protected Against Corrosion Compared to Ceramic Coating on These Reamer Tek Screws
Need Torx Bits? Please Follow the Link:
TORX-Driver-Bit-Set-2-inch T-25
OR
T-30 2-inch TORX-Driver-Bit-Set
Jake Sales (a subsidiary of Totoly Jake, Inc.) has been in business since 1977 selling & installing many of the products we currently sell, including; Fencing Supplies, Fasteners, roofing products, etc., in the beautiful Flathead Valley.  We are located in Kalispell, MT just minutes from Glacier National Park in Northwest Montana.  Jake Sales is not new to selling products online.  We have been in the online fulfillment business since 2009.  We have continued to pride ourselves in shipping quality products in a timely fashion (paid orders received before 12 noon ship the same day).  JakeSales.com prides itself in honest business practices.
Thank you for viewing our listing!